FFA -8004 G2 DSP Amplifier

Sale!

FFA -8004 G2 DSP Amplifier

From: £4,120.00 £3,296.00

Price excludes VAT

  • 4x 2000 Watts at 2 Ohms
  • FFA Class D PWM amplifiers
  • Power supply soft start
  • High thermal headroom
  • Weight – 10kg

Description

In Stock At Supplier. Usually ships in 1-3 business days.

Trade enquiries welcome. Found a lower price? Let us know

A completely new amplifier design from FFA.

Designed to give exceptional audio for live performance sound.

FFA-8004 G2 DSP amplifier’s provide a cost effective solution for sound system design.

Ideal for permanent installation or temporary sound.

The DSP software has been designed to be functional and quick to use and has a familiar feel to that of a mixing console.

The software runs on all platforms – PC or MAC/ IPAD based software.

The DSP is accessed by Neutrik Ethercon and connected using an Ethernet network direct to a personal computer (MAC/ IPAD or PC) or via an Ethernet Hub or wireless router.

The DSP has 4 analogue audio inputs or 1 pair of selectable AES/EBU digital inputs.

There are 6 analogue audio output channels – 4 assigned to the FFA-8004 power amplifier and 2 assigned to a pair of male XLR connection on the rear panel of the amplifier.

These extra processed outputs could be used to design a 3-way stereo system of bass, mid and high frequency where the 2 outputs drive a 2 channel bass amplifier or used as a 2 channel DSP for any signal that requires control.

The DSP features a broad band input compressor and 2 stage output signal limiter. The signal limiting allows precise system protection or contains environmental noise.

The DSP is fully password protected and has options to disable functionality. This gives the designer a tool to keep interference from unauthorised persons whom may change parameters which could either damage the loudspeaker system or exceed set environmental noise levels.

Features at a glance

  • Exceptional sound quality
  • High Power efficiency and cool running
  • Rugged Tour class Aluminium construction
  • Lightweight – 10 kg
  • FFA Class D PWM
  • High current switch mode power supply designed to give continuous power
  • Superb limiter
  • 4 XLR analogue audio inputs
  • Neutrik® powerCON power input
  • PSU soft start
  • Hand-built & designed in Hertfordshire, England
  • 5 year factory warranty

Suitable Applications

Exceptional sound for all loudspeaker systems – bass is powerful, fast and tight – mids and high frequency are natural and open.

Stage monitor performance will give super clear vocal sound.

Vocal and high-frequency ineligibility for large scale systems is superb.

Ideal for any night venue, theatre, cruise ship, AV systems, Cinemas, Conferences

temporary audio installation at summer music festivals.

 

Power

Ratings

FFA – 8004 G2 DSP – 4 x 1000W 8 Ohm, 4 x 2000W 4 Ohm
Gain 32 dB
THD Typical 0.05 4 Ohm 1kHz THD+N
Frequency

Response

20Hz – 20kHz +- 0.5dB
Controls 40 Point Potentiometer per channel, power on switch
Indicators signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up
Load

Protection

DC on output, side chain TCA clip limiter circuit
Amplifier

Protection

Short circuit, current overload, thermal shutdown, high frequency stability circuit
Audio Signal

Inputs

Balanced Neutrik® Female XLR input connected Pin 1 – GND, Pin 2 – Hot +, Pin 3 – Cold – . XLR Male signal throughput each channel
Audio Signal

Outputs

Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system for example stage monitor system
Power

Requirement

1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC

120V (configured at factory)

System

Cooling

High CFM 80mm fan with proportional signal speed control. Rear to front airflow
Dimensions 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19″ rack mount enclosure
Weight 10 kg

Additional information

Delivery & Returns

Free Delivery on all orders over £99 plus VAT.

Your purchase will usually be with you within 3 working days of your order being placed.

If you are in the Scottish Highlands, Northern Ireland, Isle of Man and the Channel Isles you will still get free delivery but your order may take up to 6 working days to get to you.

Please note: Delivery times pending stock availability.

-I need my products quickly- can you help?

Absolutely! Please give us a call and we'll do our best to get your items to you quickly

-When is the cut off for Next day delivery?

If you place your order before 2 pm Monday- Friday, we will dispatch the same day.

-Returns

Our returns department aims to help you as quickly as possible with any issues you may have with your product.